M232 User Guide

USER GUIDE CONTENTS

DO NOT USE AT SPEEDS ABOVE 65 KM/H (40MPH)
Install securely by a responsible adult
The M232 does not replace a standard front and rear bike light
The M232 may be distracting to you or others on the street. Every riding location and situation is different, only you can judge your own safety
Be aware of your local traffic laws. Some regions may not allow some colors of lights. You can select colors on the M232 to meet your local laws.

2 years against manufacturing defects. Cosmetic variations in the clear coating are normal.

OFF -> LOW -> HIGH

3 red flashing lights: low battery

Select your favorite theme by pressing the THEME button.
The default theme (#1) is random
When pressing the THEME button, the pattern of purple lights indicates which theme is currently selected.

Select your favorite colors by pressing the COLOR button.
The default color setting is random.
When pressing the COLOR button, the color of the lights indicates which colors are currently selected.
Each theme has its own color choices. Pick your theme first, then choose which colors you want for it!

To reset to factory defaults: press THEME and COLOR together for 3 seconds

The “Menu Lock” feature prevents accidental changes to your THEME and COLOR settings
When Menu Lock is enabled, the THEME and COLOR buttons will not respond unless you first unlock them by holding THEME + COLOR together for 1 second.
After you unlock, the THEME and COLOR buttons will work normally for about 2 minutes. Then they will automatically lock again.

The “3 Power Buttons” feature makes it easier to turn your Monkey Light on and off in the dark
The 3 Power Buttons feature turns all 3 buttons into POWER buttons.
With this feature enabled you will not be able to change your THEME and COLOR settings until you disable this feature.

Turn on your Monkey Light bike light
Press and Hold THEME + COLOR for 5 seconds to RESET the light to factory defaults
As soon as the light resets, hold the POWER button for 2 seconds. You will see 5 yellow lights – this is the Advanced Settings Menu.
One of the 5 yellow lights is flashing.
Press the POWER button several times to move the flashing yellow light.
To enable MENU LOCK: Move the flashing yellow light to the 3RD position, then hold the POWER button for 2 seconds. Flashing blue lights indicate you have enabled the feature.
To enable 3 POWER BUTTONS: Move the flashing yellow light to the 4TH position, then hold the POWER button for 2 seconds. Flashing blue lights indicate you have enabled the feature.

Turn on your Monkey Light bike light
Press and Hold THEME + COLOR for 5 seconds to RESET the light to factory defaults.
If your Monkey Light only shows white and will not turn off: press POWER button 4 times, then press THEME button 4 times, then press COLOR button 4 times, then wait 10 seconds. Your light will be back to normal.